Select your car
carburetor, injection, fuel pump
Model:
911 86
-
Illustration:
107-40
Parts that fit your car
| Position | Description & partnr | |
| Air correction jet (a) 200 61610090000 |
||
| Hexagon-headtappin 4,8 x 19 90018700402 | ||
| Spring washer b 6 90002800801 |
||
| Sealing ring 10 x 16, copper. N0138083 | ||
| Hexagon nut
m 4 N0110046 |
||
| Washer 4,3 90002500202 |
||
| Push-on connector 99965214240 | ||
| Halogenbulb 12v 90063112590 |
||
| Washer a 5,3 90002500302 |
||
| Washer M6 N0115247 | ||
| Rubber sleeve 99970211950 | ||
| Lockring a 8 90002700502 |
||
| Spring washer b6 N0122265 | ||
| Lock ring b 6 90002701401 |
||
| 356 AT2/B/C Stopper access hole teardrop taillights. (Also used on 911 behind the dashboard) 99970306750 | ||
| Circlip 90004101301 | ||
| Sealing ring 14 x 18 Aluminium 90012300730 | ||
| Double-end spanner 8 x 9 99919501102 |
||
| Double-end spanner 10 x 11 99919501202 |
||
| Double-end spanner 17 x 19 99919501502 |
||
| (Model: CARRERA 3.0 (S))Sticker 93000653503 | ||
| (Model: 911/93)engine k-jetronic 91110019300 |
||
| (Model: 911/94)engine k-jetronic 91110019400 |
||
| (Model: 911/42)engine k-jetronic 91110014200 |
||
| (Model: 911/98/SPM)engine k-jetronic 91110019800 |
||
| (Model: 911/99/SPM)engine k-jetronic 91110019900 |
||
| (Model: 911/47/SPM)Engine 91110014700 | ||
| (Model: 911/83)engine with mechanical injection 91110018301 |
||
| (Model: 930/12/SPM)engine k-jetronic 93010011200 |
||
| Sealing ring remote temperature sensor 90012300830 |
||
| Sealing ring 18 x 24 copper 90012300920 | ||
| Sealing ring a 14 x 18 N0138492 |
||
| >> | (Model: 911/83)gasket set crankcase comprising: 91110090504 |
|
| O-ring 8 x 2 round cord ring 356,911,914,928,944,959,964,993,996T.GT3-1 99970100640 | ||
| 911 (65-77) and 356 Carrera (692/3A engine), Crankshaft seal flywheelside 99911305752 | ||
| Sealing ring copper, 22 x 27 mm. 90012301120 | ||
| sealingring A 10X16 AL 90012306630 | ||
| shaftsealingring 99911318940 |
||
| >> | Brakepad set, used on 356 C, 911 (65-75) for the front (cast iron "M" calliper) and on 911 (69-89) for the rear. 91135295004 | |
| (Model: CARRERA 3.0)body in white 91150092125 |
||
| (Model: CARRERA 3.0)body in white targa 91150092126 |
||
| (Model: CARRERA 3.0)body in white 91150092162 |
||
| (Model: COUPE)Tapping screw b 4,2 x 13 N0140933 |
||
| (Model: (AUS))Shake-proof washer j 12,5 N0121122 |
||
| Lockring b 10 90002701603 |
||
Replaced by N10155210 N0110106 |
||
| all 356/911 Bulb 12v 2w for instrument cluster and clock 90063110290 | ||
| all 356/ 911 '65-'77/ 914 Cap spark plug connector 111905449A | ||
| Water protection cap 99965903440 | ||
| Speed nut 99950700102 | ||
| (Model: 911/911S/ CARRERA 2.7)Clip 99951103602 | ||
| (Model: 911/911S/
CARRERA 2.7) Replaced by 90015102801 90015102802 |
||
| Spring washer a 4 N0122243 |
||
| Sealing ring 18 x 24 aluminium 90012310630 | ||
| Sealing ring a 20 x 24 90110219100 |
||
| Replaced by 93010734714 together with 93010734706 93010734703 | ||
| Sealing ring a 18 x 24 90012300930 |
||
| Hexagon-headbolt m 6 x 22 90007501602 |
||
| >> | Conversion set 93011391103 | |
| Sealing ring screw socket 90012300625 |
||
| Tool bag 64472101001 | ||
| 356 Pre-A/A/B Flat screwdriver with wooden handle, 235 mm long and handle diameter of 26 mm. 99919100201 | ||
| 356 A/B Philips screwdriver with wooden handle, 205 mm long and handle diameter of 26 mm. 90013700101 | ||
| Bag with 5 fuse tool and accessories 64472101300 |
||
| All 356, 911 (65-68) Carjack for emergency use, as supplied by Porsche. (handle not included) 64472201000 | ||
| Suppression connector for distributor em/w/1/20 99961912100 |
||
| Rubber cap wnk 1 z 14 x 61660990300 |
||
| Paint touch-up applicator please state the colour 64472280100 |
||
| (Model: 911 TU)engine with - WEBER 40 IDT 3C-3C1 - carburettor 90110090106 |
||
| Sealing ring c 18 x 24 relief valve 90012302570 | ||
| Sealing ring for banjo bolt 61610842300 |
||
| Sealing ring distributor 99970110150 |
||
| Gasket 69210090200 | ||
| Sealing ring for filter 90110091500 |
||
| Sealing ring for filter 90110091600 |
||
| Sealing ring 90110091700 | ||
| Sealing ring 90110091800 | ||
| Sealing ring 90110091900 | ||
| >> | (Model: 912) Replaced by 61610190101 61610190100 |
|
| Sealing ring
copper 36901111 |
||
| Gasket cover crankcase 53901106 |
||
| Sealing ring rubber for oil duct 53901122 | ||
| Sealing ring oil duct crankcase a 14 x 18 91110112300 | ||
| Gasket crankcase lid 356 A 53901124 | ||
| Gasket bracket generator 356 53901125 | ||
| 356 A-C / 912 Gasket oil drain lid (2 necessary) 53901152 | ||
| Stopper rubber 61601115 |
||
| rubber seal for oil duct and oilcooler 61610112300 | ||
| Gasket crankcase lid 616011241 |
||
| Washer 61610119100 | ||
| Gasket only for racing 61610193100 |
||
| Gasket only for racing 61610193200 |
||
| 356 / 912 Gasket flywheel 50202301 | ||
| Sealingwasher 61610216301 | ||
| Gasket oil pump 53907108 |
||
| Gasket m >> 601 994 m >> 85 940 m >> 800 149 53907109 |
||
| Sealing ring 53907117 | ||
| Gasket m 731 968 >> m 820 997 >> m 713 689 >> m 812 145 >> 61610790201 |
||
| 356A/BT5 Sealing ring oilfiller to alternator support 00097301 | ||
| Sealing ring
oil thermostat 356 -59 00097326 |
||
| Sealing ring oil thermostat 00097327 |
||
| 356A/B/C O-ring intermediate flange fuelpump/fuelpump 99970104350 | ||
| 356 / 912 Front pulley seal 99911301250 | ||
| 356 / 912 Flywheel seal 99911302950 | ||
| Sealing ring copper 10 x 14 x 1 N0138062 |
||
| all 356 and 912 Sealing ring headbolt, 8req. 53904203 | ||
| Gasket m 601 995 >> m 085 941 >> m 800 150 >> m 713 789 >> m 812 210 >> not for (d)(s) m 732 048 >> m 821 040 >> m 610 755 >> m 700 590 >> m 800 526 >> not for (d)(s) m 611 118 >> m 706 801 >> m 807 187 >> m 610 75 61610139100 |
||
356 BT-6/C, 912 Oil Breather Base Gasket 61610779201 |
||
| 356/912 Rubber seal oil duct and oil cooler 99970413250 | ||
| 356, 912 Cylinder base gasket copper 0.25mm 53904209 | ||
| 356/912 Gasket cylinder head cover 61610495100 | ||
| all 356/912 Gasket cam follower protective tube (16req.) 53905207 | ||
| 356SC/S90 912 Gasket intake manifold solex 40 61610890500 | ||
| Gasket for carburettor 61610890102 |
||
| 356/912 Gasket exhaust silencer 61611129100 | ||
| Gasket carburettor 40 pii-4 and air cleaner 61610829100 |
||
| >> | (Model: 912)356 S90/C/SC/912 set of piston rings 61610390705 | |
| Pistonrings nute 1 m 820 641 >> m 811 362 >> not for (d)(s) 61610333100 |
||
| Pistonrings nute 2 m 820 641 >> m 811 362 >> not for (d)(s) 61610333101 |
||
| Piston rings nute 1 $ 83,0 mm oversize m 820 641 >> m 811 362 >> not for (d)(s) 61610333150 |
||
| Piston rings nute 2 $ 83,0 mm m 820 641 >> m 811 362 >> not for (d)(s) 61610333151 |
||
| >> | (Model: 911 S)piston ring $ 84,25 91110394525 |
|
| 356BT6/C Retaining strap complete for windscreen washer reservoir and fusebox cover 64462809100 | ||
Replaced by 90037803001 90037803009 |
||
| Hexagon-head bolt m 8 x 15 90007507802 |
||
| Is changed in 90002701503 90002701502 | ||
| Hexagon-head bolt m 6 x 20 90007401202 |
||
| Circlip 16 valve guide exhaust 90015200500 |
||
| All 356, 912 (65-69) Oilcooler aluminium, less change of cracking your engineblock and better cooling. (latest version with 8 mm studs, if needed crankcase mounting holes must be drilled) 61610704102 | ||
| Spring 3 x 5 N0127051 | ||
| All 356, 912 (65-69) Generator shim washer, pulley side. (On late 912 models with larger 420W generator also used for the impeller side). In total there should always be 10 used on the pulley side. 53909314 | ||
| All 356, 912 (65-69) Generator nut, pulley side. (On late 912 models with larger 420W generator also used for the impeller side) 54709303 | ||
| 356 C, 912 (65-69) Voltage regulator 12 volt 30 A, Bosch silver housing regulator but with electronic regulator instead of mechanical. (can also be used on earlier models) 61660321200 | ||
| _ | Flat receptacle 0,5 x 1,5 111971959 |
|
| Hexagon-head bolt m 6 x 12 90007501002 | ||
| Sealing ring pk 17 629 61610890407 |
||
| Sealing ring pk 10 937 70210842200 |
||
| Snapring 99904100101 |
||
| Pan-head screw pzk 5 096 61610890417 |
||
| >> | (Model: 912)Repair kit fuel pump 356 C/912 61610890301 | |
| Diaphragm pzk 5 354 61610890409 |
||
| Fuel filter pk 17 66 61610890406 |
||
| Pin pk 18 120 61610890411 |
||
| 356/911 (1960-1986) Shaftsealingring a 15 x 24 90011200150 | ||
| Replaced by 113311113B 99911304850 | ||
| Sealing ring for filter a 16 x 22 cu - hengst - 90012301920 |
||
| Cotter pin 3 x 15 N0125301 |
||
| Hexagon-headbolt m 8 x 25 90007508302 |
||
| Hexagon-headbolt m 8 x 18 N01023911 |
||
| Clamping spring 90135191710 | ||
| Safety seal 356 (60-65) 911 (65-73) 914 (70-76) 924 (76-79) 928 (78-86) 90135195510 |
||
| >> | (Model: 911 /TU 912)356C/ 911 '64-'68 Repair kit rear calliper, for 1 calliper 90135296411 | |
| Protection cap 90135293710 | ||
| Circlip 69535162990 | ||
| >> | (Model: 911 /S)Repair kit brake master cylinder 69535593000 |
|
| Valve 69535590800 | ||
| Boot 69535591200 | ||
| Piston 69535591400 | ||
| Circlip for brake master cylinder 69535591700 |
||
| Protection cap for brake master cylinder 69535592000 |
||
| Serratedlockwasher a 5,3 90011500101 |
||
| Hexagonnut m 8 90007601302 |
||
| Washer a 8,4 90015100802 |
||
| Hexagon-head bolt m 8 x 25 90007502902 |
||
| Hexagonnut m 6 snm 99908410302 |
||
| Hexagon-head bolt m 6 x 18 m 731 968 >> m 820 997 >> m 713 689 >> m 812 145 >> 90007501402 |
||
| Is changed in 90015100603 90015100609 | ||
| Fuelhose inner diameter 7.5mm, outer diameter 12.5mm 99918003050 | ||
| Rubbersleeve 99970202750 |
||
| Speednut 99950700202 |
||
| Hexagon-headbolt m 5 x 15 90007509702 |
||
| Washer 8,4 90003100102 |
||
| Hexagon nut m 3 90007600102 |
||
| Rubber sleeve $ 8 mm 99970202050 |
||
| Lockring a 8 90002700501 |
||
| Pan-head screw m 6 x 20 90006701102 |
||
| Is changed in 90002700403 N0120072 | ||
| 356 B/C 911 (65-73) Plastic profile bumper guards. Price per meter. 99991118240 | ||
| Hexagon nut m 10 90015800302 |
||
| all 356/ 911 '65 - '77 Rubber pedalstop 90142352800 | ||
| Key state lock number 64461390102 |
||
| Hexagon-headbolt m 6 x 10 N01021013 |
||
| Rubbersleeve 12 x 20 x 10 99970202650 |
||
| Rais. counters. h. tap. s. b 3,5 x 19 90014500602 |
||
| Protection washer 99959110212 | ||
| Tapping screw b 3,5 x 13 N0139587 |
||
| Linolite lamp 12v 10w for interior light 90063110690 | ||
| Lockring b 4 90002701101 |
||
| Relay 12 volt headlamp PCG61510110 | ||
| Hexagon nut m 8 N0110088 | ||
| Flat receptacle 99965210602 | ||
| Hexagonsocketheadb 90006700802 |
||
| Hexagonsocketheadb m 6 x 18 f 108 918 >> 110 406 f 152 476 >> 153 022 f 86 831 >> 87 491 90006701001 |
||
| 356/911 Valve collet with ribs 90110541700 | ||
Replaced by 90007609201 N0110073 |
||
| 356B/C 912 Valve spring 61610543203 | ||
| (Model: 911 T-V:SPM)engine 911/67 91110016701 |
||
| Sealing ring screw plug 90110897600 |
||
| Multipleplugconnec 99965212210 |
||
| Rubbersleeve 4 x 7 x 6,5 99970201150 |
||
| 2 | Hexagon-headbolt m 6 x 15 N01021513 |
|
| 3 | Is changed in 90015100603 90015100609 | |
| 6 | Ball socket with 8 mm ball and 5 mm right hand threaded hole N0155213 | |
| 10 | (Model: 911 E/S)356BT6/C, 911 (65-89) Connecting piece throttle linkage under the car, metal enclosed rubber. 91142308102 | |
| 11 | Ball socket with 8 mm ball and 5 mm right hand threaded hole N0155213 | |
| 14 | Tapping screw b 3,5 x 9,5 mm N0139575 | |
| 14 | 356 B/C, 911 (65-68) Throttle rod reverse lever on gearbox, angle between levers is 78 degrees. 90142302702 |
|
| 15 | 356 B/C, 911 (65-89) 914-6 Accelerator rod bell crank lever bushing, 2 needed. 91442321100 | |
| 16 | Washer 10,5 90002500802 |
|
| 17 | Cotter pin 3 x 15 N0125301 |
|
| 20 | Ball socket with 8 mm ball and 5 mm right hand threaded hole N0155213 | |
| 21 | Hexagon nut m8 SW 12 50208310 | |
| 22 | Lock ring 8 90014200201 |
|
| 23 | 356 B/C, 911 (65-89) 914-6 Accelerator rod bell crank lever bushing, 2 needed. 91442321100 | |
| 24 | Washer 91142322500 |
|
| 25 | Is changed in 90015100603 90015100609 | |
| 27 | Spring washer b 6 90002800801 |
|
| 31 | 356 B/C, 911 (65-89) 914-6 Accelerator rod bell crank lever bushing, 2 needed. 91442321100 | |
| 31 | Washer 4,3 90002500202 |
|
| 33 | all 356/ 911 '65 - '77 Rubber pedalstop 90142352800 | |
| 34 | Hexagon nut m 3 90007600102 |
|
| 35 | Spring washer b6 N0122265 | |
| 37 | Is changed in 90002701503 90002701502 | |
| 41 | All 356, All 914, All 911 (65-98) Brake and clutch pedal pad 91442321000 | |
| 51 | Is changed in 90002701503 90002701502 | |
| 52 | Is changed in 90002500703 90002500702 | |
| 56 | Replaced by 91142434101 99970600980 |
|
| 57 | Hexagon-head bolt m 6 x 18 m 731 968 >> m 820 997 >> m 713 689 >> m 812 145 >> 90007501402 |
|
| 58 | Spring washer b 6 90002800801 |
|
| 61 | 356A/B/C 911 -'69 Seal clutch cable end 69542392200 | |
| 62 | Clevis
g 6 x 24 g 25 001 >> 90016600202 |
|
| 63 | (1950-1988) Clutch Cable Clevis Pin 99916600102 | |
| 65 | Adjusting nut f 120 623 >> f 210 693 >> f 153 898 >> 69542340700 |
|
| 66 | Replaced by 90007609201 N0110073 |
|
| 67 | Is changed in 90002500703 90002500702 | |
| 68 | Is changed in 90002701503 90002701502 | |
| 73 | Hexagon nut m 10 90015800302 |
|
| 75 | Cotterpin 3 x 20 90002101500 |